All guides

Jewellery Glossary: The Terms That Come Up in a Commission

Most confusion in a jewellery commission comes from a handful of words: carat meaning two different things, hallmark versus certificate, cast versus forged. This glossary defines the terms we actually use when quoting and making a piece, so the brief and the finished ring mean the same thing.

Metals and marking

Carat (metal): the proportion of pure gold in an alloy, expressed in 24ths. 18k means 18/24, or 75% gold. Carat (stone): the weight of a gemstone, where one carat is 200 milligrams. The same word, two unrelated measures — which is why a quote should always say which.

Assay: independent testing of a precious metal article to establish its fineness. Hallmark: the marks struck after assay, recording the maker or sponsor, the metal and fineness, and the assay office. Fineness: the metal purity in parts per thousand — 750 for 18k gold, 950 for platinum. Rhodium: a white metal plated over white gold to brighten it; it wears and is re-applied.

Palladium: a lighter, whiter platinum-group metal, hallmarked at 950 or 500 fineness.

Stones and grading

The 4Cs: cut, colour, clarity and carat weight — the four factors in a diamond grading report. GIA report: a grading report issued by the Gemological Institute of America, recording those factors for a specific stone, usually with a report number.

Girdle: the thin edge around a polished diamond, where the claws grip. Culet: the small facet at the bottom of a brilliant cut. Spread: how large a stone looks face-up for its weight. Table: the large flat facet on top. Certification is not the same thing as a hallmark: a report describes the stone, a hallmark describes the metal.

Settings and construction

Claw or prong setting: metal claws bent over the girdle to hold the stone. Bezel or rub-over: a continuous metal rim around the stone, the most protective setting. Pavé: many small stones set close together so the surface reads as a continuous sheet of light, with beads of metal raised between them. Channel: stones held between two parallel walls of metal. Flush: stones set into the metal so their table sits level with the surface.

Milgrain: a row of tiny metal beads worked along an edge as a decorative border. Gallery: the structure between the finger and the stone. Basket: the seat-and-claw assembly under a centre stone. Shank: the band of the ring. Shoulder: the section of shank either side of the setting.

Casting: metal poured into a mould made from a model. Forging: metal shaped with heat and hammer. Wax model: the sacrificial model burnt out during casting.

Buying and paperwork

Quoted per job: our standard phrase, meaning the price depends on metal, stones, design hours and finishing rather than a published rate. CAD: computer-aided design, the 3D model of the piece. Render: a photorealistic image of that model, issued for approval.

Insured delivery: shipping where the parcel is insured for its full value until signed for. Trade account: a wholesale arrangement for jewellers, brands and designers, with pricing and terms set for resale rather than retail.

Questions about this

Is a hallmark the same as a certificate?

No. A hallmark records the metal and its fineness after independent assay. A certificate — such as a GIA grading report — describes a stone. A ring normally has both, and they say different things.

What does 18k actually mean?

18 parts of pure gold out of 24, so 75% gold by weight. That is what the 750 mark in a hallmark records.

What is the difference between pavé and channel setting?

Pavé holds small stones with raised metal beads so they sit flush in a field of metal. A channel holds stones between two parallel walls of metal, with no beads between them.

Where this happens

Both routes are the same workshop at 100 Hatton Garden, Suite 225, London EC1N 8NX.

How our Hatton Garden workshop makes a piece
Chat with us

We Value Your Privacy

We use cookies to enhance your experience. By clicking "Accept All", you consent to our use of cookies.