Workshop service

CAD Jewellery Design in Hatton Garden

CAD jewellery design is the stage where a piece is drawn as a 3D model, then rendered so you can check it from every angle before any metal is cut. Renders arrive within 24 hours of an agreed brief, and the design stage sits inside a standard 2-4 week build.

What does CAD jewellery design actually give you?

You get a dimensioned 3D model of the piece and photorealistic renders showing how the metal will read on the hand, how the stones will sit and how deep the setting needs to be. Because the model is a real geometric object, we can check finger size, band width, stone diameters and the thickness of the metal under each claw before anything is cast.

That checking matters most where a design leaves the page and meets a real stone. A 2.00ct oval and a 1.90ct oval of the same spread behave differently under the same four-claw setting, and the model lets us adjust the basket depth in minutes rather than after a casting has been made. The approved file then drives the wax print, the casting and the setting instructions, so the workshop works from one version of the truth.

Who is CAD design for — trade partners or private clients?

Both, and we run them as the same process with different paperwork. Private clients commission a single piece and approve it themselves; retailers, designers and brands send a brief or a reference piece and approve it on behalf of their own client. Trade partners often keep a specification on file, so a repeat order — same mount, different centre stone — can go straight to casting without a new design round.

If you are working from a photograph or an existing ring rather than a technical drawing, that is normal. Bring the image, the stone or the piece to 100 Hatton Garden, Suite 225, and we will take the measurements needed to model it.

How long does the CAD stage take, and how many revisions?

First renders within 24 hours of a brief we both understand. Revisions are logged against the project and usually turned around the same working day, sometimes within hours if the change is a stone size or a band width.

The design stage is days, not weeks; the calendar time in a commission is nearly always metal work and stone sourcing. Standard production is 2-4 weeks from approved CAD. Where a proposal date cannot move, our express service can compress a build to 4-6 days, and we will say at the first meeting whether your design and stone make that realistic.

What can you change after seeing the render?

Anything geometric: metal, band profile, claw style, gallery height, stone count, setting layout, engraving position and finish. What we do not do is pretend a change is free once the piece is cast — which is why every design is signed off in writing, with the render attached, before the wax is printed.

If a change lands after casting, it is quoted as a remake or an alteration rather than absorbed silently, and we tell you that up front.

How does the CAD file become a real piece of jewellery?

The approved model is grown in wax and cast in the metal you have chosen — 18k white, yellow or rose gold, platinum, palladium or silver. The casting is cleaned up, the stones are set by hand, the piece is polished and finished, then sent to a UK assay office for testing and hallmarking.

Certification depends on the stone, not the design: where a diamond carries a GIA grading report, the report number is recorded against your job so the finished piece, the certificate and the project record all line up.

At a glance

Specification and turnaround for this service
Typical turnaroundFirst render within 24 hours of an agreed brief. Revisions usually the same working day. Design feeds a standard 2-4 week build.
MetalsModelled for whichever metal the piece will be cast in: 18k white, yellow and rose gold, platinum, palladium, silver.
Stones we setGIA-certified natural and lab-grown diamonds, coloured gemstones, matched pairs and calibrated parcels.
What you supplyA brief, sketch, photograph or reference piece. A stone you already own if the design is built around it.
What you get backA dimensioned 3D model and photorealistic renders, with the approved file held on your project record.
Where it happens100 Hatton Garden, Suite 225, London EC1N 8NX.

Frequently Asked Questions

How much does CAD design cost?

Design work is quoted per job, because a solitaire model and a pavé eternity band are not the same amount of work. You get a written quote before any modelling starts.

Can I bring my own design or a photo of a ring I like?

Yes. A photo, a sketch or a ring you already own is enough to start; we take the measurements needed to turn it into a model.

Do I get the CAD file?

You get the renders and the approved model drives production. The native file stays with the workshop, but it is kept on your project record so repeat orders and future repairs can be made from it.

Can you model around a stone I already own?

Yes, and it is the better way round for inherited stones. We measure the actual stone rather than modelling to a nominal size, which avoids a setting that is close but not right.

Is CAD design suitable for white label work?

It is how most white label ranges are built. Your specification is modelled once, approved once, and then held on file so each subsequent order stays identical.

Next step

Send us the brief — a photograph, a sketch, a stone or a specification — or book an hour at 100 Hatton Garden, Suite 225, London EC1N 8NX. We will confirm what is possible, the timeline and a written quote before any work starts.

  • Standard turnaround 2-4 weeks from approved design
  • Express service 4-6 days where a deadline is fixed
  • Hallmarking at a UK assay office; GIA certification where applicable
Chat with us

We Value Your Privacy

We use cookies to enhance your experience. By clicking "Accept All", you consent to our use of cookies.