Caesar Diamonds
Small Batch Jewellery Production and Pilot Orders
Small batch production is making a limited run, typically one to fifty pieces, from a single approved specification. It starts with a pilot piece so you can judge the casting, setting and finish before committing to volume. The master model and specification are held on file so every batch matches.
Start with one piece, not fifty
A pilot order is the cheapest form of due diligence available to a jewellery business. You see the CAD render, the casting quality, the setting, the finish and the hallmark on a single piece before any volume is committed. If something is wrong, it is wrong once rather than fifty times.
It also tests the working relationship: how quickly a question is answered, whether a revision is understood first time, whether the paperwork arrives with the piece. Those things are hard to judge from a quotation.
Per-piece pricing at 1, 10 and 50 units
Price per piece falls as volume rises, because the fixed work is spread across more units. The model is made once, the master is held, and the mould or print work is amortised. What does not fall is the metal and the stones, which are charged at their own price on the day.
We quote each volume band separately rather than quoting a headline figure and adding setup afterwards. At one unit you are paying for the design and the master in full. At ten, that work is shared. At fifty, the per-piece price is dominated by metal, stones and bench time rather than by setup.
The master model and specification on file
The approved CAD model, the metal specification, the stone specification and the finish are held against your account. A repeat order is made from that source rather than re-drawn from a photograph, which is what stops batch ten drifting away from batch one.
This is also why a specification has to be signed off in writing before the first casting. A verbal description of a finish or a setting style will be interpreted differently by different people over time; a stored model will not.
Batch quality control
Every batch is checked against the stored specification, not against the previous batch. That distinction matters: if batch three had a small error, comparing batch four to batch three would repeat it. Comparing both to the master catches it.
Inspection covers metal weight against the metal issued, stone count and seating, setting security, surface finish, and the hallmark. Findings are recorded against the batch so a question months later can be answered from the record.
At a glance
| Typical turnaround | Pilot piece on the standard 2-4 week build from approved CAD. Repeat batches run against the held specification. |
|---|---|
| Metals | 18k white, yellow and rose gold, platinum, palladium and silver. |
| Stones we set | GIA-certified natural and lab-grown diamonds, coloured gemstones, matched pairs and calibrated parcels. |
| What you supply | Your design or a brief to develop, the metal and stone specification, and the volumes you are planning. |
| What you get back | A pilot piece for approval, then production runs with the master model and specification held on file. |
| Where it happens | 100 Hatton Garden, Suite 225, London EC1N 8NX. |
Frequently Asked Questions
What counts as a small batch?
In our workshop, one to fifty pieces from a single specification. Above that the scheduling and the quality control change shape, and it is worth talking through before you commit rather than discovering it mid-run.
Do I have to order a pilot piece first?
It is strongly recommended for a first order, and it is how most partnerships start. A pilot lets you judge casting, setting and finish on one piece before volume. If you are already working from a specification we have produced, a pilot is not necessary.
Why does the price per piece change with volume?
The model, the master and the setup are made once and then shared across the run. Metal and stones do not fall with volume because they are charged at their own price on the day. So the saving comes from setup, and it flattens out as the run gets longer.
How do you keep repeat orders identical?
The approved model and specification are stored against your account, and each batch is inspected against that stored specification rather than against the previous batch. That prevents a small error in one run being carried forward into the next.
Can you produce under my own brand?
Yes. Pieces are supplied without our name. UK law still requires a hallmark above the exemption weight, which includes the maker's mark, so the legal marking cannot be removed. We will explain exactly what appears on the piece before you commit.
Talk it through
Send a brief, a sketch or a photograph, or book an hour at 100 Hatton Garden, Suite 225, London EC1N 8NX. We will confirm what is possible, the timeline and a written quote before any work starts.
Contact the workshop