Caesar Diamonds

Jewellery Finishing and Hand Engraving

Finishing is the last stage before hallmarking, and it decides how a piece reads in the hand: polish, plating, milgrain and engraving. White gold is normally rhodium plated because the alloy itself is slightly warm; platinum is finished by hand rather than high-polished. Finishing sits inside the standard 2-4 week build.

Polishing is not one operation

A polished piece has usually been through several stages: coarse abrasive to remove tool marks, finer abrasive to remove the scratches the first stage left, then a final polish. Skipping a stage does not save time, it just moves the scratches. Under a loupe, a piece that has been polished in two steps instead of four looks blotchy at the curves and sharp at the edges.

Different surfaces want different treatments. A flat band wants a mirror finish, a textured surface wants a satin or brushed finish, and a hand-engraved panel wants enough polish to lift the cuts without rounding them over.

Rhodium plating and white gold

White gold is gold alloyed with white metals, usually palladium or a nickel-bearing alloy, and it is never truly colourless. The alloy reads slightly warm or slightly grey. Rhodium plating deposits a thin layer of a white platinum-group metal over the surface to give a bright white finish, and it is why most white gold in a shop window looks colder than the raw alloy.

The plating wears, particularly on a ring worn daily. Replating every one to two years is normal, and it is a maintenance item rather than a fault. A piece that is plated also cannot be re-polished as aggressively, because polishing through the plating reveals the alloy underneath.

Milgrain and where it belongs

Milgrain is a row of tiny beads worked along an edge. It was originally a way of securing and hiding the seam where a setting met a band, and it survives because it catches light along an edge and softens a hard transition between surfaces.

It belongs on vintage-inspired work, on the edges of a bezel, and along the rails of a shoulder. It does not suit a minimal modern band, where a clean edge is the whole point. Milgrain is applied before final polish, and it wears down over decades, which is worth knowing before choosing it on a ring that will be worn every day.

Hand engraving and where it goes

Hand engraving is cut with a graver rather than lasered or machined, and it has a different quality of line: the cuts vary slightly in depth and width, which is what makes the lettering catch light. Machine engraving is faster, more uniform and considerably cheaper, and for a small inscription inside a band it is often the right choice.

The usual positions are the inside of a band, the outside face of a band, a flat panel on a signet, and the reverse of a pendant. Inside a band the inscription is protected and invisible in wear. Outside, it is exposed to wear and to resizing: an engraving on the outside of a band will be interrupted if the ring is later cut and re-joined.

Why platinum is finished by hand

Platinum behaves differently from gold at the polishing wheel. It is denser, and rather than losing metal as it wears it displaces it, so a polished surface develops a soft sheen rather than scratches. A high mirror polish on platinum does not hold the way it does on gold, and forcing one produces a surface that looks glassy rather than bright.

So platinum is generally finished by hand to a satin or soft polish that suits how the metal actually behaves. That is also why a platinum piece can be refinished years later without losing noticeable weight, and why it is harder to resize than gold: the metal has to be moved rather than stretched.

At a glance

Specification and turnaround for this service
Typical turnaroundFinishing is part of the standard 2-4 week build. Re-polishing and replating on their own are quoted per job after assessment.
Metals18k white, yellow and rose gold, platinum, palladium and silver.
Stones we setStones are checked and tightened before finishing, since polishing can loosen a setting that was only just secure.
What you supplyThe piece, plus the finish you want kept or changed, and the engraving text or artwork.
What you get backThe finished, polished piece with the engraving cut, ready for assay hallmarking where the metal weight requires it.
Where it happens100 Hatton Garden, Suite 225, London EC1N 8NX.

Frequently Asked Questions

Why does white gold need rhodium plating?

Because white gold alloy is not truly white. It reads slightly warm or grey, and rhodium plating deposits a bright white layer over the surface. The plating wears on a ring worn daily, so replating every one to two years is normal maintenance rather than a repair.

How often should a white gold ring be replated?

Every one to two years for a ring worn every day, longer for pieces worn occasionally. The plating thins where it rubs, usually the underside of the band and the edges of the setting, which is where you will notice the warmer alloy showing through first.

What is milgrain?

A row of tiny beads worked along an edge, originally used to secure and conceal the seam where a setting met a band. It catches light along the edge and softens a hard transition. It suits vintage-inspired work and does not suit a minimal modern band.

Can a ring be engraved after it is made?

Yes, and it is usually done before final polish. The inside of a band is the safest position because it is protected in wear. Engraving on the outside of a band will be interrupted if the ring is later resized, so if you expect a resize, put the inscription inside.

Why is platinum not high-polished?

Because platinum displaces metal rather than losing it, so a mirror polish does not hold the way it does on gold. Platinum is finished by hand to a satin or soft polish that suits how the metal behaves, and it can be refinished years later without losing noticeable weight.

Talk it through

Send a brief, a sketch or a photograph, or book an hour at 100 Hatton Garden, Suite 225, London EC1N 8NX. We will confirm what is possible, the timeline and a written quote before any work starts.

Contact the workshop
Chat with us

We Value Your Privacy

We use cookies to enhance your experience. By clicking "Accept All", you consent to our use of cookies.